3 Steps to Keep Your Car Door Lock in Working Condition
3 Steps to Keep Your Car Door Lock in Working Condition – Once in a while we stumble upon a problem with the car door locks.
It could be that they are jammed or the key is stuck in the ignition.
These problems can be due to weather changes or a lack of maintenance.
When you reach that point you can only sit back and have it repaired and pay good money for it.
Therefor, there or a few tips we have gathered to help you.
these tips are simple, easy and will not deprive you of much time.
Cleaning the locks
This step might seam complicated and problematic but it is actually rather easy.
All you need to do is to use any sharp and long object with a thickness of about a tooth pick
and rap it in a piece of cloth or cotton. Then insert it to the lock and move it at all degrees.
doing this for about 4-5 minutes will remove any debris in the lock completely.
This will prove effective because when you lubricate unclean locks it is less effective and the locks will be jam more easily
Silicone spray lubricants are you best option as a car owner. It doesn’t not stick to the inside of the lock.
it is best to use it after each cleaning of the lock and it should completely coat the inside of the lock.
This should helped jammed locks that happen due to dry weather.
Anti rust spray.
It is suggested that every time you car encounters snow, rain or a wash you should use anti rust spray after lubricating .
you should apply it the same way you applied the lubricant and it will help to avoid.
if your are finding the ,maintenance of your car locks difficult you can always call a locksmith service so they can help you with that.